Power Breathers-CV™

Protects lubricants and equipment from moisture and particulate intrusion. TTI’s check-valve technology is ideal for low flow applications with intermittent operations.

This breather unit is a marked improvement over the customary dust caps or OEM breathers on equipment. When contaminated air enters the top of the breather, it passes through layered filter media, preventing solid particles from entering the breather and causing undue wear to your equipment surfaces. Filtered air passes through a bed of Power Breather silica gel, which removes harmful moisture from the air. The silica beads also work to attract moisture from inside the equipment reservoir during service or shut-down, keeping the equipment dry. The addition of check-valves in our CV breather is ideal for low-flow and intermittent operations in high humidity conditions.

  • Center Tube
    The center tube is constructed from rugged nylon material providing rigidity to the element and allowing for even airflow through the silica gel.

    Secondary Filter Media
    Second filter step prevents any possible migration of silica dust providing added system protection.

    Oil Mist Collector
    Polyurethane foam collects oil mist and distributes air evenly over filter media and moisture absorbing silica gel.

    Moisture Absorbent
    The Power Breather silica gel provides industry leading
    moisture removal and holds up to 40% of its weight.

  • ABS Outer Shell
    Clear outer shell provides a visual indicator of silica gel condition allowing for optimum change out intervals.

    Filter Media
    3-micron absolute particulate filtration is provided by a polyester filter media.

    Check-Valves
    Check-valves provide protection in washdown areas. Check-vavles isolate equipment from ambient conditions, prolonging life.

    Sure-fit Connection
    Use sure-fit connections instead of filler/breather cap. Adapters also available.

  • Applications

    •High Humidity Areas
    •Washdown Environments
    •Low-Flow
    •Gear Boxes

  • Typical Industries

    •Manufacturing
    •Chemical
    •Pulp & Paper
    •Storage Facilities
    •Mining
    •Power Plants
    •Wind Energy

Dimensions

Model Connection Height Width Max Moisture Retention Max Airflow at 1psid
TT-BB-CV 3/8” Sure-Fit (NPT, BSPP, BSPT) 4.30”(10.92cm) 2.52” (6.40cm) 28ml / 1.0 fl oz 5 cfm / 142 lpm
TT-1-CV 3/8” Sure-Fit (NPT, BSPP, BSPT) 5.80” (14.73cm) 2.52” (6.40cm) 60ml / 2.0 fl oz 5 cfm / 142 lpm
TT-2-CV 1” Sure-Fit (NPT, BSPP, NPSM) 6.24” (15.85cm) 4.10” (10.41cm) 142ml / 4.8 fl oz 10 cfm / 283 lpm
TT-3-CV 1” Sure-Fit(NPT, BSPP, NPSM) 8.44” (21.27cm) 4.10” (10.41cm) 264ml / 8.9 fl oz 10 cfm / 283 lpm
TT-4-CV 1” Sure-Fit 10.54” (NPT, BSPP, NPSM) 10.54” (26.78cm) 4.10” (10.41cm) 424ml / 14.3 fl oz 10 cfm / 283 lpm

  • Materials

    Body:
    ABS, Nylon, Polypropylene, Buna

    Moisture Absorbing Media:
    Silica Gel

    Filter Media:
    Polyester, Polyurethane

    Filter Efficiency:
    3 Micron Absolute

    Operating temperatures:
    -20 F to 200 F
    -29 C to 93 C

  • Performance

    Performance
    The TTI Breather offers significant performance improvements over other leading desiccant breathers.

    Value add features:
    Multiple head-to-head tests with leading competitors demonstrate that TTI POWER Breather Silica Gel averages nearly 20% more moisture holding capacity than other leading brands.

    The increased body length of the TTI POWER
    Breather allows for 10% more volume
    of our silica gel when compared to
    leading competitors